New Tractor Loader

New Holland U80D Tractor Loader

S/N: JJGNU80DLPC767806

Location

GREEN ACRES MACHINERY

1006 Carlos G. Parker Blvd S.W., Taylor, TX 76574

+1 (512) 352-6381

Highlights

Horsepower
74 hp
Length
16 ft 11 in
Width
6 ft 10 in
Weight
10,916 lbs

Description

New Holland's tractor loader model U80D provides profit-producing potential on both the front and back with 74 HP and the clean power of a Tier 4 Final certified engine. You get responsive power at both bucket and hitch, so this machine pays its way by loading, stacking, scraping and leveling. The performance capabilities of the U80D reveal how job site domination is just a loader away.

Features

A Jobsite Champion: New Holland tractor loader U80D brings a sense of ease to completing job site tasks. Leverage 6,503 lbs (2950 kg) of lift capacity to full height using a long lip bucket and 6,537 lbs (2965 kg) using a 4-in-1 bucket. From the lowest point in hitch position, the machine yields 2,500 lbs (11,121 N) of lift capacity and 2,984 lbs (13,274 N) at the highest point. The fully integrated loader control lever allows the operator to manage all loader and front auxiliary functions comfortably in one location.

Place Precisely: The U80D tractor loader has the precision, such as hydraulic bucket leveling, to perfectly place loads and greatly reduce spillback. Efficient truck loading also comes from the excellent 2 ft 2 in (0.66 m) of reach at maximum dump height with both the long lip and 4-in-1 bucket. The unique reverse-mounted loader arm cylinders produce a 4-in-1 bucket breakout force of up to 10,325 lbs (45928 N) that accompanies its superior dump speeds. When you add the Glide Ride option, a flip of a switch turns the boom cylinders into the equivalent of giant shock absorbers to stabilize the load while traveling.

Smooth Direction Changes: The rugged Class II three-point hitch with controllable down pressure yields a maximum lift force of 3,501 lbs (15574 N) for superior scraping and leveling performance. For added versatility, consider a 540-rpm Power Take Off (PTO) to run PTO-driven attachments. PTO ready forward and reverse travel speeds range from 3.5 mph (5.6 km/h) in first, up to 21.3 mph (34.3 km/h) in fourth.

Business In The Front And Back: The synchromesh transmission with power shuttle gives you smooth control and easy forward-reverse shuttling, resulting in polished direction changes between the four forward and four reverse gears. The high-powered 4-speed syncromesh transmission also has hydraulically actuated clutches and clutch disconnect buttons on the transmission shifter and loader control lever. For even more traction, there is an on-the-go push button for differential-lock activation.

Operator Comfort: Base equipment on the U80D features elements that supplement performance capabilities, such as integral engine oil cooling, a fuel filter with water trap and hydrostatic steering. Plus, operators will have ample storage in the cab and peace of mind while working thanks to the safety instruments like warning lights and audible alarms, to name a few. The large, flat-deck operator platform provides easy-to-use controls and unobstructed views for outstanding visibility.

Operating Weight

10,916 lbs (4951 kg)

Overall Dimensions

Overall operating height – fully raised: Long Lip Bucket - 13 ft 8 in (4.17 m)

Overall length w/ 3-point hitch: Long Lip Bucket - 16 ft 11 in (5.15 m)

Dump angle @ full height: Long Lip Bucket - 46°

Electrical

Voltage: 12 Volts, negative ground

Alternator: 120 amps

Battery: 850 CCA

Optional batteries: 850 CCA

Engine

Power plugs: 30 total amps

Powertrain

Transmission type 4 speed synchromesh with hydraulically actuated clutches and electric F/R shuttle control, clutch disconnect buttons on the transmission shifter and loader control lever

Torque converter ratio (standard): 3:1

Torque converter (PTO ready): 3.2:1

Differential-lock: On the go push-button activation

Service brakes: Individually applied hydraulically actuated, maintenance-free, self adjusting outboard mounted wet disc

Parking brakes: Trans Mounted SAHR (Spring Applied Hydraulic Release)

Hydraulics

Pump Gear-type, transmission mounted, direct drive to engine crankshaft

Loader flow @ rated engine rpm, gpm @ psi (L/min @ bar): 28.5 @ 3,000 (108 @ 207)

Loader control valve 2 or 3-spool with single lever control for lift, dump and tilt and auxiliary hydraulics, positive hold float and return-to-dig

3-pt hitch flow @ rated engine rpm, gpm @ psi (L/min @ bar): 3 to 8 @ 2,000 (0 to 30 @ 137)

3-pt hitch control valve Sectional 4-spool, open-center parallel circuits with variable control for lift, pitch, tilt, and 2 auxiliary remotes

Loader auxiliary hydraulics, gpm (L/min) 12 to 28.5 (45.4 to 108)

Main relief pressure, psi @ gpm (bar @ L/min): 3,050 + 50 - 50 @ 28.5 (210 + 3 - 3 @ 108)

Filtration 7 micron full flow replaceable cartridge on return line, condition indicator light for filter

Oil cooler: Heavy-duty

Driving hydraulics - Flow rate: 22.2 gpm (84 L/min)

Tires

Front: 2WD-11 L x 16.1, 10-ply rating; 4WD-12 L x 16.5, 8-ply rating

Rear: 2/4 WD-17.5 L x 24, 10-ply rating STD ; 2/4 WD-19.5 L x 24, 10-ply rating OPT

Payment

Step 1/2

Message

*** Compact Excavator prices are for base unit only, not inclusive of attachments. Please see your dealer for attachment pricing.

*Financing for commercial use only. Payment amount is an estimate for illustrative purposes only. This is not an advertisement or offer of credit. Customer participation subject to approval by CNH Industrial Capital America LLC or CNH Industrial Capital Canada Ltd. (individually, and collectively, “CNH Capital”) of a completed credit application and acceptable documentation meeting CNH Capital’s credit, collateral, regulatory, and other requirements and guidelines. Not all customers may qualify for this rate or term. Down payment may be required. Taxes, freight, setup, delivery, additional options or attachments not included. Documentation fees and additional terms may apply. Subject to unit and program availability at time of purchase, and subject to change or cancellation without notice. Quoted information not valid after the last day of the calendar month in which it was provided. See your participating New Holland dealer for details and eligibility requirements.

This price represents MSRP less (whatever discount is used). Dealer price may vary and may be less or more than the shown price. Please see authorized New Holland Construction dealer for final selling price.